Volvo V50 2006 Owner Manual

pg. 62 Home Link® Universal Transceiver (option), Page 73 of 225 pages for Volvo V50 2006 Owner Manual.

Owner Manual Page Carousel

Owner Manual PDF Viewer

2006 Volvo V50 toll free 1-800-355-3515 (Internet: ). 4. Using two hands, push and hold both your hand-held transmitter's button and the transceiver button you wish to program. The indicator light will flash first slowly, then rapidly. Rapid flashing indicates that the HomeLink button has been successfully programmed. Release both buttons. 5. If you are programming a rolling code-equipped device (e.g., garage door opener or entry door lock), refer to "Programming rolling codes" on the next page to complete the programming process. 6. Repeat steps 3 and 4 to program the other two transceiver buttons. If, after several attempts, you are unable to successfully train the HomeLink Universal Transceiver to learn your hand-held transmitter's signal, contact HomeLink toll-free 1-800-355-3515 (Internet: ). WARNING! If you use HomeLink to open a garage door or gate, be sure no one is near the gate or door while it is in motion. Do not use the HomeLink Universal Transceiver with any garage door opener that lacks safety "stop" and "reverse" features as required by federal safety standards. (This includes any garage door opener model manufactured before April 1, 1982) A garage door opener that cannot "detect" an object, signalling the door to "stop" and "reverse" does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. For more information on this matter, call toll-free 1-800-355- 3515. (Internet: ) pg. 62 Home Link® Universal Transceiver (option) Canadian residents: During programming, your hand-held transmitter may automatically stop transmitting. To successfully train HomeLink, continue to hold the HomeLink button. At the same time, repeatedly press and hold your hand-held transmitter's button at two-second intervals until HomeLink has learned your transmitter's code. The HomeLink indicator light will flash first slowly, and then rapidly to indicate that the button has been successfully programmed. Determining if your garage door uses a rolling code Determine, in one of the following ways, if your garage door uses a rolling code system and is manufactured after 1996: Refer to the garage door opener owner's manual for verification. If your hand-held transmitter appears to program the HomeLink Universal Transceiver but the programmed button does not activate the garage door, your garage door opener may have a rolling code. Press the programmed HomeLink button. If the garage door opener has the rolling code feature, the HomeLink indicator light flashes rapidly and then glows steadily after approximately 2 seconds. file:///K|/ownersdocs/2006/2006_V50/06v50_03b.htm (16 of 18)12/30/2006 4:49:29 PM

Owner Manual Pagination