1994 Volvo 960
pg. 6:5 Replacing bulbs
The method for replacement of bulbs in the various lighting units is shown on the following pages.
Make sure when installing bulbs, that the guide pin on the socket fits into its corresponding recess.
When installing Halogen bulbs, do not touch the glass with your fingers because grease, oil or any other
impurities can be carbonized onto the bulb and damage the reflector.
Use bulbs of correct type and voltage. Failure to do so could cause the bulb failure warning light to
NOTE: Turn the ignition and the light switch off before replacing any
1 Pull the connector out.
2 Loosen the ring by turning it counter-clockwise.
3 Pull the bulb straight out.
4 Replace the bulb and reinstall the unit in the reverse order.
Bulb Power US Bulb No.
file:///K|/ownersdocs/1994/1994_960/94960_6_5.html (1 of 15)12/30/2006 9:52:42 AM