Fuji Xerox DocuPrint C1190 FS User Guide

Connecting via USB

Connecting via USB

Choosing a Connection Method
4-4
Network Connection
Depending on your particular setup, the following hardware and cabling are required for Ethernet.
If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required. 
If you are connecting to one or more computers with an Ethernet hub, or cable or DSL router, two or 
more twisted-pair (category 5/RJ-45) cables are required. (One cable for each device.)
If you are connecting to one or more computers with a hub, connect the computer to the hub with one 
cable, and then connect the printer to the hub with the second cable. Connect to any port on the hub except 
the uplink port.
 
See also: 
Configuring the Network Address 
on page 4-5
 Installing the Print Drivers 
on page 4-9
Scanning to a Computer on a Network 
on page 7-8
Scanning to Email 
on page 7-13
Connecting via USB
If you are connecting to one computer, a USB connection offers fast data speeds. To use USB, PC users 
must have Windows 2000, Windows XP, Windows XP x 64 bit, Windows Server 2003, Windows Server 
2003 x 64 bit, Windows Vista, Windows Vista x 64 bit, Windows Server 2008, or a newer operating 
system. Macintosh users must use Mac OS X, version 10.3.9 and higher.
USB Connection
A USB connection requires a standard A/B USB cable. This cable is not included with your printer and 
must be purchased separately. Verify that you are using the correct USB cable for your connection (2.0 for 
best results).
1.
Connect one end of the USB cable to the printer and turn it on.
2.
Connect the other end of the USB cable to the computer.
 
See also: 
Address Book Editor 
on page 3-3
Express Scan Manager 
on page 3-3
 Installing the Print Drivers 
on page 4-9