Fuji Xerox ApeosPort-IV C5580, ApeosPort-IV C6680, ApeosPort-IV C7780, DocuCentre-IV C5580, DocuCentre-IV C6680, DocuCentre-IV C7780 Administrator Guide

Z Fold Half Sheet Position Adjustment

Z Fold Half Sheet Position Adjustment

Fold Position Adjustment
635
Ap
pe
ndix
16
Z Fold Half Sheet Position Adjustment
Adjust the Z Fold Half Sheet position. 
1
Select [Z Fold Half Sheet - A3], [Z Fold Half 
Sheet - B4], [Z Fold Half Sheet -11x17"], or 
[Z Fold Half Sheet - 8K], and then select 
[Change Settings].
2
Select [Sample Printout].
3
Select the tray in which you loaded paper, 
and press the <Start> button.
A sample printout is printed.
4
Select [Save].
5
Check the printed sample printout, and measure the A and B fold position movement 
amounts.
6
Enter the value you measured in step 5 in 
[Values A & B Before Adjustment], and the 
value to which to adjust in [Desired Values A 
& B].
Important • Set value B so that an edge of the paper 
does not extend beyond a fold position of 
the paper. Extending an edge of paper 
beyond a fold position of the paper may 
cause a paper jam.
7
Select [Adjust].
8
Select [Sample Printout] again to print a sample printout, and check the adjustment 
results.
9
Adjust the alignments again if necessary (step 6).
10
Select [Save].