Fuji Xerox ApeosPort-IV C5580, ApeosPort-IV C6680, ApeosPort-IV C7780, DocuCentre-IV C5580, DocuCentre-IV C6680, DocuCentre-IV C7780 Administrator Guide

Paper Jams in Tray 5 Bypass with HCF B1 S

Paper Jams in Tray 5 Bypass with HCF B1 S

15 Problem Solving
554
P
r
oblem S
o
lv
ing
15
2
Remove all paper loaded in Tray 5 (Bypass).
Important • When two or more sheets of paper are 
loaded, remove all of the sheets from the 
tray.
Note
• If paper is torn, check for any torn pieces 
of paper inside the machine.
3
Close the top cover.
4
Fan the paper you removed making sure that all four corners are neatly aligned.
5
Insert the paper into the tray with the printing 
side facing up until its leading edge lightly 
comes up against the paper feed entrance.
Note
• Do not load paper exceeding the 
maximum fill line. It might cause paper 
jams or machine malfunctions.
Paper Jams in Tray 5 (Bypass) with HCF B1-S
The following describes how to clear paper jams in Tray 5 (Bypass) when HCF B1-S is 
installed.
1
Remove the jammed paper and all paper 
loaded in Tray 5 (Bypass). 
Important • When two or more sheets of paper are 
loaded, remove all of the sheets from the 
tray.
Note
• If paper is torn, check for any torn pieces 
of paper inside the machine.
2
If the paper cannot be removed in step 1, 
clear the paper jam by opening the front 
cover of the transport unit.
For information about clearing paper jams from the 
transport unit, refer to "Paper Jams in Tray 6 (HCF 
B1-S)" (P.557).