Fuji Xerox ApeosPort-IV C5580, ApeosPort-IV C6680, ApeosPort-IV C7780, DocuCentre-IV C5580, DocuCentre-IV C6680, DocuCentre-IV C7780 Administrator Guide

Loading Paper in Tray 5 Bypass, Loading Tab Paper in Tray 5 Bypass

Loading Paper in Tray 5 Bypass, Loading Tab Paper in Tray 5 Bypass

Loading Paper
49
P
a
pe
r a
nd O
the
r
 M
e
dia
2
Loading Paper in Tray 5 (Bypass)
When printing or copying with paper sizes or types that cannot be set in Trays 1 to 4 
and 6, use Tray 5 (Bypass).
The following describes how to load paper into Tray 5 (Bypass).
To make detailed instructions for printings, specify the instructions using the [Paper/
Output] tab in the print driver. When doing this, also specify the type of paper to load.
Important • Do not supply new paper until the tray runs out of paper to prevent paper jams or making 
mistakes of paper loading.
Note
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each 
other and reduces paper jams.
1
Open Tray 5 (Bypass) as necessary.
Note
• If necessary, extend the extension flap. 
The extension flap can be extended in 
two stages. When pulling out the 
extension flap, do it gently.
2
Hold the center of the paper guides and slide 
them to the desired paper size.
3
Load paper with the side to be copied or 
printed on facing up, and insert the paper 
lightly along the paper guide until it comes to 
a stop.
Important • Do not load mixed paper types into the 
tray.
• Do not load paper exceeding the 
maximum fill line. It might cause paper 
jams or machine malfunctions.
4
When loading a non-standard paper size on Tray 5 (Bypass), move the paper guides 
to accommodate the paper.
Loading Tab Paper in Tray 5 (Bypass)
The following describes the procedure for loading tab paper in Tray 5.
Important • Tab paper can be used only for [Tab Margin Shift], Covers, and Separators.
Note
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each 
other and reduces paper jams.