Fuji Xerox ApeosPort-IV C5580, ApeosPort-IV C6680, ApeosPort-IV C7780, DocuCentre-IV C5580, DocuCentre-IV C6680, DocuCentre-IV C7780 Administrator Guide

Overwrite Hard Disk, Print Mode

Overwrite Hard Disk, Print Mode

4 Machine Status
120
Ma
ch
in
e St
at
u
s
4
Multi-poll Report
You can check the result of a multi-poll communication (polling from multiple 
recipients). The remote terminal name and transmission result/status are recorded.
If you set to print this report automatically, it is printed each time a multi-poll 
transmission is completed.
For information on setting whether to print the report automatically, refer to "Broadcast/Multi-Poll 
Report" (P.161).
File Transfer Report - Fax Server
This report is output after image data scanned by the machine is sent to a Server Fax 
server via a network. It contains the scanned document image and the transmission 
result. To have the report printed, enter the System Administration mode.
For information on specifying whether or not to have the report printed automatically, refer to "Scan File 
Transfer Report (Fax Server)" (P.162).
Job Flow Error Report
This report notifies job flow errors. The date and time of the error occurred and the error 
codes are printed.
You can set not to print out the Job Flow Error Report automatically.
For information on setting whether to print the report automatically, refer to "Job Flow Error Report" 
(P.162).
Overwrite Hard Disk
You can check the overwriting status of the hard disk. "Overwriting" indicates that the 
overwriting is in progress. "Standby" indicates that the overwriting is completed.
Note
• This feature does not appear for some models. For more information, contact our Customer 
Support Center.
• [Overwrite Hard Disk] appears when [Overwrite Hard Disk] is enabled under [Authentication/
Security Settings]. For more information, refer to "Overwrite Hard Disk" (P.291).
1
Select [Overwrite Hard Disk].
2
Check the overwriting status of the hard disk.
Print Mode
You can print the programming settings configured in the ESC/P-K emulation mode 
and retrieve the programming.
Note
• The items displayed vary depending on the options installed.
1
Select [Print Mode].